You have searched for products starting with "M"
Stirs and mixes solutions with use of magnetic stirrer bar (not included) immersed in the liquid which spins very quickly. View Details
Teflon coated magnet bar aids in stirring/mixing of solutions etc. View Details
Used as electrodes in electrochemistry to create simple cell- or in thermal conductivity experiments. View Details
As students manipulate the balance, they gain insight into abstract concepts of number operations View Details
Four dice with colours, shapes and numbers on the faces. Probability Dice. View Details
Indispensable in allowing learners the opportunity to construct their own knowledge in Euclidean and transformation geometry. View Details
Double-sided distortion-free plastic mirrors help teach concepts of symmetry when used with Pattern Blocks. View Details
Microcentrifuge is ideal for quick spin downs, micro-filter cell separations View Details
Bioviewers are tough styrene instruments, almost unbreakable View Details
A cost effective mini skeleton with moveable joints and complete with stand. View Details
Colour may vary. Microtest Tube rack which holds 80 x 1.5/2.0ml tubes. View Details
Kit includes: Set of 6 Plates 96-well plastic microtiter plates. View Details
The feed screw has a 1mm pitch and a wide milled flange so that the embedded material View Details
Suitable for use with transmitted light microscopes. For use together View Details
Model of monocot root showing internal details in transverse section. View Details
Size 75 mm x 1 mm. Heparinised - Sodium Coated. View Details
A selection of materials in the form of rectangular blocks intended to familiarise the student View Details
The Micro centrifuge is ideal for your laboratory if you are looking to do the following; DNA extraction View Details
Ideal for circuits where a high current is required at low voltage. View Details
The set contains four element specimens: copper, iron, zinc and aluminium View Details
Crystal microphone mounted in a moulded plastic box with 4mm connection. View Details
This miniature Light Dependent Resistor is housed in an epoxy package. View Details
A set of twelve metal strips for magnetism experiments. Each strip is stamped with a key letter View Details
Set of 6 cylinders: Brass, Lead, Copper, Iron, Aluminium and Zinc. View Details
Metal Density Cubes – 20mm Side Set of 6: Brass, Lead, Copper, Zinc, Aluminium & Iron. View Details
Non-magnetic metal pillar with carbon steel point. On stable base, of overall height 110mm. View Details
Magnetic Field Demonstrators: A round coil that provides the field pattern of 2x conductors passing through a surface View Details
Range 0-25 x 0.01 mm, supplied in case. Accuracy at 10mm is +/- .003mm. View Details
Easy-to-use kit demonstrates N & S pole, levitation by repulsion, strength and distance View Details
Raised graduation for easy reading. These jugs are clear & autoclavable. View Details
Determination and analysis of the stability of floating bodies, such as ships, rafts and pontoons View Details
Fuel enters the pipette from the tank. The fuel supply from the tank is then cut off via a valve so that the engine draws fuel View Details
The main parts of the equipment are: A ball indenter for Brinell hardness tests An extensometer with a digital display for tensile View Details
A mobile self-contained Multi-Pump Test Rig, containing all the services & instrumentation View Details
Use:- For Compression & Tension Tests Machine For Tensile Test (500Kn) And Compression Test (2000 Kn). View Details
Tool for special purpose machines, application based. Material: SS and MS. View Details
Our machines are acknowledged for their attributes such as compact design, portability, high effectiveness and low power consumption. View Details
The weight of the motor is balanced by another weight, which is on either side of the rotor. View Details
A Variac provided control of driving motor. As the test is destructive, after the test cannot be used, hence the unit only demonstrates the principle. View Details
This is a simple and essay to understand set up introduce by sharp View Details
Maximum Cutting Capacity 45° - 45°: 35 x 60 (L) / 40 x 90 (R) mm View Details
Use:- Measuring liquid limit. View Details
Use:- CBR test for determining bearing capacity of soils. View Details
Our welding machines are incorporated with gas regulators, pre-heaters and MIG torches. View Details
Color coded gauges, valves and hoses. Diagnostic and Service Tool Set. View Details
Blade length: 12" Hardened high carbon steel blade View Details
Automatic temperature correction. Built-in wood calibration scales. View Details
A small ship model having provision to put the load on the deck or at the base and an arrangement View Details
Rectangular CRC tubes mounted on 5 cms castors, height adjustable by side Knob. View Details
There is a button beside the LCD screen, if you put the button down, it will be Oscillometric measuring View Details
Mercurial Sphygmomanometer is traditional blood pressure measuring instrument View Details
Lss Africa Mercurial Sphygmomanometer is traditional blood pressure measuring View Details
The model shows the small branches of principal bronchus: Section of bronchiole of no cartilage. View Details
This model shows all relevant structures in great details. Size: 19x18x6 cm View Details
Real life model consist of durable parts with ABS stand having detachable joints. View Details
Depicts the position, course and distribution of main arteries and peripheral nerves. View Details
Ceramic, in natural finish. High Field strength. View Details
Two solid and two hollow cylinders each 10cm long accurately fitting the bore of a hollow brass tube View Details
A well balanced; machine turned aluminium disc rotating at about its axis and can be clamped on a tripod stand in vertical plane. View Details
The validity of the law of conservation of energy is demonstrated using the Maxwell disk View Details
The four-gap bridge has a large and heavy copper strip of mounted on a heavy 3/4 inch thick laminated base. View Details
Set of six different elements in cylindrical form for density in electrical and thermal experiments. View Details
Set of six different metals. They consist of one piece each of copper View Details
Two concave aluminum cups having diameter either 62mm or 75 are provided with handle and stop cock. View Details
Material: non-woven with outer layer impervious liquid splash resistant material View Details
Material: Mechanics inside made of steel Mechanical, spring driven countdown timer, professional use View Details
Dismountable aluminium gear structure Hand operated View Details
Audio signal indicates reaching one hundred cells counted Separate lever View Details
Single-use, sample collection and measuring microcuvette. View Details
Ambient operating temperature: Min. +5°C, Max. +43°C Power requirement: 220-240V 50Hz View Details
Ambient operating temperature: Min. +5°C, Max. +43°C Freeze Protection: Grade A View Details
Ambient operating temperature: Min. +5°C, Max. +43°C Freeze Protection: Grade A View Details
The CD-ROM provides worldwide coverage with base-map level detail including the following features View Details
Select V (Select 5) signalling. 7 programmable buttons, 3 status LEDs. View Details
Material: Polypropylene, autoclavable. View Details
Viewing Head : Monocular Head 45°, 360°. View Details
Stage: Built in graduated mechanical stage of 135x120mm. Low coaxial drive controls for easy and smooth scan of specimen slides. View Details
Lss Africa Moisture Balances set a new standard for data communication making recording results faster View Details
